10 Best Wireless Ir Remote Control Extender

Product Highlights

arrow_forwardCOMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included.

arrow_forwardWIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

arrow_forwardINSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay; built-in LED indicator illuminates when the signal is received for easy status recognition

arrow_forwardHASSLE-FREE INSTALLATION: Ultra-compact design with bundled infrared extension cables allow easy and flexible placement. Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal.

arrow_forwardNOTE: We recommend using the kit without the IR extension cables. Simply placing the Receiver Unit in line-of-sight with source device can support longer range. Only use the extension cable if needed. Contact us with any questions.

Product Highlights

arrow_forwardNOTE Some devices us RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices.

arrow_forward10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another

arrow_forwardIncluded USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet

arrow_forwardKnown compatibility issues with: Yamaha HTR 6140 and Arris DCX 3520E-M

arrow_forwardControl any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!

Product Highlights

arrow_forwardrefer the FAQ below for troubleshooting

arrow_forwardGo room-to-room and control your components from up to 100 feet away

arrow_forwardSpecially designed 2/3 AAA batteries are rechargeable in base station

arrow_forward433.92 MHz base unit emits IR signal to your nearby devices

arrow_forwardConvert as many remotes as you like with extra battery transmitters

Product Highlights

arrow_forwardCOMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters(656 feet) away(line-of-sight), depending on surrounding obstructions.

arrow_forwardWIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

arrow_forwardHIGH PERFORMANCE IR electronics provide real time signal transmission without delay ; Features Click Lock ID button pairing the transmitter and receiver, preventing interference from other devices.

arrow_forwardEASY INSTALLATION: Portable size design with bundled infrared extension cables allow easy and flexible placement anywhere in a home or office environment. Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal.

arrow_forwardPREMIUM QUALITY: Aluminum housing enhances heat dissipation and durability for durable and dependable performance. Supported with a 2 year warranty and life time technical support located in California.

Product Highlights

arrow_forwardAVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR LOCATED ON THE BACK OF THE CABLE BOX. If the lbox is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into the back of the box. The box will reboot.All units are bench tested and working before leaving the factory.

arrow_forwardCOMPATIBLE with Verizon Fios Cable boxes model QIP, CHS,IPC, and VMS series NOT COMPATIBLE WITH QP6xxx and QIP2500, also works with DTA271, DTA50 etc. Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, Uverse or A/V Receivers,IR Repeater kits, or port on the back of any box stating Serial. It is for data and technicians use

arrow_forwardDO NOT BUY TO USE WITH AV STEREO RECEIVERS , IR REPEATER BLOCK, OR SMART TV,s. IT WILL NOT WORK

arrow_forwardLOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43in tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.

arrow_forward25 years experience manufacturing for the Hotel and Cable industry.

Product Highlights

arrow_forwardBUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.

arrow_forwardIMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!

arrow_forwardWARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!

arrow_forwardCOMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!

arrow_forwardCONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately.

Product Highlights

arrow_forwardUp to 330ft

arrow_forwardExtender

arrow_forwardgray

Product Highlights

arrow_forward▶▶Wireless Repeater- The Best Choice for Fashion：This is an creative product to hide the components which is controlled by the infrared remote controller,suitable for families, companies, hotels, etc. The people who are tidy and fashional,can use this artifact to hide their A/V components in an entertainment system cabinet or wardrobe to get more clean.

arrow_forward▶▶Wide Compatibility :Both the infrared emitter and the receiver's frequency is 20-60KHz, compatible with most infrared-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.

arrow_forward▶▶The Best Distance and Technology: 700 feet long range between the infrared emitter and the infrared receiver, and the infrared receiver can cover your remote controller with 30 feet long distance and 90 degrees. Only use the extension cable if needed.

arrow_forward▶▶Hassle-free Installation and Instant Transmission:Highly sensitive modules provide a real-time signal transmission without delay. Built-in LED indicator ,the repeater will illuminate if it receive a signal .Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal.

arrow_forward▶▶12 MONTHS WARRANTY, 100% SATISFYING GUARANTEED:Contact us with any questions.One year warranty of the product from the date of purchase.Any issue just don’t hesitate to contact us.