10 Best Vinyl Tile Cutters

Product Highlights

arrow_forwardDesign for cutting LVP,LVT,VCT,WPC,PVC,Luxury Vinyl Planks. Cutting unapproved materials will void warranty. Not for business； For home indoor DIY installation!

arrow_forwardNo dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.

arrow_forward13" cutting width and 8mm cutting depth. Straight cut, Angle cut; " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.

arrow_forward2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service life，man-made damage is not covered by the warranty.

arrow_forward" L & 凵" cut and Lengthwise cut is suitable for soft flooring. SPC has a stone powder composition, the material is brittle and high in hardness, so it will crack. So these three cutting methods are not suitable for SPC. Replacement Blade: https://www.amazon.com/Sharp-Blade-Flooring-Cutter-LVT-330/dp/B07GF8PWD2?ref_=ast_sto_dp

Product Highlights

arrow_forwardHardend steel blades for accurate cuts

arrow_forwardConvenient carry handle for easy transport

arrow_forwardLocking blade and convenient handle makes transport easy

arrow_forwardMolded handle for extra grip and comfort

arrow_forwardBuilt in ruler to use as cutting guide

Product Highlights

arrow_forwardBONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank.

arrow_forwardDesigned to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardier plank

arrow_forwardCuts up to 9” wide

arrow_forwardAngle gauge allows for cuts up to 45 degrees

arrow_forwardQuiet, dust free operation, No electricity required

Product Highlights

arrow_forwardCuts 12 in. horizontally, and a 9 in. tile diagonally

arrow_forwardDesigned to cut Solid Vinyl Tile, Vinyl Composition Tile (VCT), and Cork Tile, up to 1/8 in. thick

arrow_forwardBuilt-in casters for maneuverability

arrow_forwardRubber feet for stability

arrow_forwardClearly marked measuring guide and 45-degree miter guide

Product Highlights

arrow_forwardFor Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”) wide and 16mm ( 5/8”) thick

arrow_forwardThe max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank.

arrow_forwardA shear blade , included a 600 Grit oilstone to keep sharp. Replacement blade;

arrow_forwardStraight cut and 45 degree angle cut. Clean and Straight cutting edg.（Fingers away from the sharp blade!）. No electricity, no dust, quick, quiet and Easy to use.

arrow_forwardItem weight 23.1 lbs

Product Highlights

arrow_forwardCuts LVT, VCT, LVP and vinyl flooring, suitable for soft flooring, Laminate Shears cut high-pressure laminates such as Wilsonart and Formica without chipping or binding. less than 4.8mm thick floors are very easy！ Can't cut wpc,spc(Rigid Core Vinyl Floor),Laminate Flooring

arrow_forwardFast, clean and more efficient, Small and easy to put together and easy to use. Leave a nice clean straight edge. .

arrow_forwardWorks well both width and length cuts.Skill: You need to cut a small distance each time to ensure that the lengthwise cuts are precisec and straight.

arrow_forwardThis a well made and designed tool. I am using it to install luxury vinyl plank flooring and it is far faster than trying to score and snap and far cleaner and more efficient than using some type of fine toothed circular saw to cut the planks.

arrow_forwardMax. thickness cutting: 6 mm. ( less than 4.8mm thick floors are very easy, more than 5 mm is more laborious.) Awesome time saver.

Product Highlights

arrow_forwardGuillotine-style cutter cuts up to 13” wide and 1/2" (12mm) thick material

arrow_forwardLong handle provides extra leverage for more cutting power with less effort

arrow_forwardTable miter gauge for angled cuts 0º up to 45º

arrow_forwardOne blade included. For replacement blades, order Roberts model 10-463 (sold separately).

arrow_forwardCuts vinyl plank flooring, vinyl tile flooring, laminate flooring, and engineered wood flooring

Product Highlights

arrow_forwardCutter for laminate floor,LVT/VCT/LVP/PVC/SPC/WPC/ Vinyl Plank.

arrow_forwardWidth of Plank Cutting:210, 300 (mm) / 8,12 (inch).

arrow_forwardIt can also make "L" Cutting, free angle cuts and lengthwise cuts(For Soft vinyl floor).

arrow_forwardThe cutter has a movable V support, which can be used to keep the board level and cut at the same time.

arrow_forwardNo dust, No noise, No electricity needed, Easy and Professional , Save time，Much safer than a saw blade.

Product Highlights

arrow_forwardCountry Of Origin: United States

arrow_forwardModel Number: ST004

arrow_forwardItem Package Dimension: 9.0" L x 6.0" W x 0.375" H

arrow_forwardItem Package Weight: 1.0 lb