
10 Best Temperature Controllers
Last Updated February, 2021
- Home /
- All Categories /
- Health and Household /
- Household Supplies /
- Temperature Controllers

Inkbird
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and 24 Hours Digital Day & Night Cycle Timer Controller for Seed Germination Reptiles Hatching
More DetailsProduct Highlights
arrow_forward👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
arrow_forward👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
arrow_forward👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
arrow_forward👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
arrow_forward👏👏【Sensor Length 】2m / 6.56ft

Briidea
Temperature Controller, Briidea Digital Thermostat Heating and Cooling Mode for Seed Germination Reptiles Homebrew Greenhouse 2-Stage Outlet 3600W 30A
More DetailsProduct Highlights
arrow_forward[Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
arrow_forward[Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
arrow_forward[Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
arrow_forward[Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
arrow_forward[Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation

Inkbird
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W
More DetailsProduct Highlights
arrow_forward🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
arrow_forward🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
arrow_forward🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
arrow_forward🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
arrow_forward🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.

Willhi
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
More DetailsProduct Highlights
arrow_forwardWE'VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
arrow_forwardKEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
arrow_forwardHEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
arrow_forwardMAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
arrow_forwardWIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1

Bn-link
BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed
More DetailsProduct Highlights
arrow_forward✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
arrow_forward✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
arrow_forward✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
arrow_forward✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
arrow_forward✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

Inkbird
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000 for Refrigerator Fermenter
More DetailsProduct Highlights
arrow_forward🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
arrow_forward🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
arrow_forward🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
arrow_forward🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
arrow_forward🌟🌟【Power Supply】 110VAC 50Hz/60Hz

Bayite
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A
More DetailsProduct Highlights
arrow_forwardSimplified Design---Plug and play, easy to set. Support °C/°F display.
arrow_forwardDual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
arrow_forwardDual Display Window---Be able to display real-time temperature and set temperature at the same time.
arrow_forwardSafe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
arrow_forwardWarranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)

Poniie
Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)
More DetailsProduct Highlights
arrow_forwardCONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
arrow_forwardDUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-40~210℉)
arrow_forwardDUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
arrow_forwardCALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
arrow_forwardBUY WITH CONFIDENCE: 1-YEAR Warranty; MAX. 1650W (110V); Over temperature & faulty sensor alarm, with power off memory

Inkbird
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
More DetailsProduct Highlights
arrow_forwardPlug and play design, easy to use;
arrow_forwardDual relay output, be able to connect with refrigeration and heating equipment at the same time
arrow_forwardSupport reading with Centigrade or Fahrenheit unit
arrow_forwardMaximum output load: 1100W(110V)
arrow_forwardDual display window, be able to display measured temperature and set temperature at the same time

Inkbird
Inkbird F Display PID Temperature Controllers Thermostat Heat Sink and Solid State Relay 100 to 240ACV ITC-106VH 40DA SSR White Heat Sink K Probe
More DetailsProduct Highlights
arrow_forward✨✨Support reading with Centigrade or Fahrenheit unit
arrow_forward✨✨Dual display window, be able to display measured temperature and set temperature at the same time
arrow_forward✨✨Simplify operational processes and you don't need to operate more steps if you want to set the definite value
arrow_forward✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
arrow_forward✨✨Operating voltage range: 85~110% Rated voltage
Related Reads
About Us
© All Rights Reserved. "Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".