10 Best Sundown Audio 12 Inch Subwoofers

Product Highlights

arrow_forward12" 750W SA Series Subwoofer

arrow_forwardDual 2-Ohm

arrow_forward750 watts RMS

arrow_forwardRE: 4.57 Ohms

arrow_forwardFs: 33.71 Hz

Product Highlights

arrow_forwardRMS Power: 1000-watts

arrow_forwardHigh Temperature copper voice coil wire

arrow_forwardSpring Loaded Terminals

arrow_forwardHigh strength cast aluminum frame

arrow_forwardOptimized for small ported, sealed, & band-pass enclosures

Product Highlights

arrow_forwardX-12 V.2 D4 - Sundown Audio 12" 1500W RMS Dual 4-Ohm X V.2 Series Subwoofer

arrow_forwardSpecifications: DC Resistance (Re): 6.1 Ω | Resonance Frequency (Fs): 38.3 Hz | Equivalent Volume (Vas): 13.2 L | Electrical Q Factor (Qes): 0.50 | Mechanical Q Factor (Qms): 4.92 | Total Q Factor (Qts): 0.45 | Voice Coil Inductance (Le): 3.82 mH | Force Factor (BL): 30.0 NA | Moving Mass (incl. Air Load) (Mms): 305.6 g | Suspension Compliance (Cms): 0.06 mm/N | Sensitivity: 84.4 dB 1w / 1m

arrow_forwardBox Recommendations: Sealed Enclosure Suggestion: Not Recommended | Ported Enclosure Suggestion: 2.50 cu. ft. | Displacement: 0.20 cu. ft. | Depth: 9.67 in | Outside Diameter: 12.68 in | Cutout: 11.09 in | Recommended Tuning: 32 Hz | Recommended Port Area: 40 sq. in.

Product Highlights

arrow_forwardRMS Power: 1000-watts

arrow_forwardHigh Temperature copper voice coil wire

arrow_forwardSpring Loaded Terminals

arrow_forwardHigh strength cast aluminum frame

arrow_forwardOptimized for small ported, sealed, & band-pass enclosures

Product Highlights

arrow_forwardBlack Aluminum 3" voice coil former for superior heat dissipation

arrow_forwardBox Recommendations: Sealed Enclosure Suggestion: Not Recommended | Ported Enclosure Suggestion: 2.50 cu. ft. | Displacement: 0.20 cu. ft. | Depth: 9.67 in | Outside Diameter: 12.68 in | Cutout: 11.09 in | Recommended Tuning: 32 Hz | Recommended Port Area: 40 sq. in.

arrow_forwardDual 2 ohm High Temperature Round-Wire CCAW voice coil with high-temp black adhesive

arrow_forward18 inch model with optional tooled Sundown Frame uses a 4-Layer Flat Wire / All Aluminum Coil that is 30% longer

Product Highlights

arrow_forwardRMS Power = 500-watts | Xmax = 14mm one-way by 70% BL | Vented magnetic gap

arrow_forwardVented pole piece with optimized geometry | Black Aluminum 2.5” voice coil former for superior heat dissipation | High Temperature 4-Layer copper voice coil wire

arrow_forwardSpring Loaded Terminals | Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure

arrow_forwardBox Recommendations: Sealed: 1.0 ft^3 | Ported: 1.75 ft^3 | Displacement: 0.12 ft^3 | Depth: 6 1/2" | Outside Diameter: 12 1/4" | Cut-Out: 11 1/8" | Recommended Tuning: 32hz | Recommended Port Area: 28 in^2

Product Highlights

arrow_forwardTwo SA-10 D4 REV.3 - Sundown Audio 10" Dual 4-Ohm 750W RMS SA Series Subwoofers

arrow_forwardRMS Power: 750-watts

arrow_forwardVented magnetic gap

arrow_forwardOptimized high-velocity pole vent

arrow_forwardMounting Depth: TBA

Product Highlights

arrow_forwardSealed Enclosure: 1 cu ft

arrow_forwardPorted Enclosure: 1.5 cu ft

arrow_forwardRecommended Tuning: 35Hz

arrow_forwardRecommended Port Area: 26 sq in

Product Highlights

arrow_forward10-Inch Dual 2-ohm Car Subwoofer

arrow_forwardPeak Power: 1,200 Watts | RMS Power: 600 Watts

arrow_forward2.5" 4-Layer High Temperature Copper Voice Coil

arrow_forwardFrequency Response Range: 28 Hz - 300 Hz | Sensitivity: 82.0 dB

arrow_forwardHigh Flux Ferrite Motor | Advanced Air Flow Cooling Design

Product Highlights

arrow_forwardSundown Audio U-12 D4 12" 1500W RMS Dual 4-Ohm U-Series Subwoofer

arrow_forwardSpecifications: DC Resistance (Re): 6.1 Ω | Resonance Frequency (Fs): 40.0 Hz | Equivalent Volume (Vas): 12.3 L | Electrical Q Factor (Qes): 0.38 | Mechanical Q Factor (Qms): 2.93 | Total Q Factor (Qts): 0.34 | Force Factor (BL): 33.7 NA | Moving Mass (incl. Air Load) (Mms): 284.5 g | Suspension Compliance (Cms): 0.06 mm/N | Sensitivity: 85.0 dB 1w / 1m

arrow_forwardBox Recommendations: Sealed Enclosure Suggestion: 1.0 cu. ft. | Ported Enclosure Suggestion: 2.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.75 in | Outside Diameter: 12.83 in | Cutout: 11.01 in | Recommended Tuning: 32 Hz | Recommended Port Area: 32 sq. in.