
10 Best Precision Power Amplifier Cars
Last Updated January, 2021
- Home /
- All Categories /
- Office Products /
- Office Electronics /
- Precision Power Amplifier Cars

Precision Power
PRECISION POWER - iON Series i650.1 Class D Monoblock 650W Amplifier with MOSFET Power Supply
More DetailsProduct Highlights
arrow_forwardCOMPACT AND POWERFUL: Amplifiers in the iON series can punch above its weight class in terms of power even with a small-sized chassis thanks to the superbly efficient full-range Class D topology and SMT technology built-in.
arrow_forwardLOW-HEAT PRODUCING CIRCUIT: The iON Series i650.1 has low heat producing circuits with a heavy-duty aluminum alloy heatsink for optimal heat dissipation to prevent damage to the amp and improve the overall performance.
arrow_forward3-WAY PROTECTION CIRCUITRY: The iON Series i650.1 also comes equipped with thermal, overload, and speaker short protection.
arrow_forwardMAXIMUM POWER: Built-in MOSFET Power Supply with Audiophile Grade IRTM Transistors let you fully listen to your favorite music without sacrificing audio quality.
arrow_forwardVERSATILE: Variable 12dB High, Low, Subsonic crossovers with dash-mounted remote gain control allow you to adjust and calibrate the sound to your liking; 12dB Bass Boost Increases Low Octave Harmonics.

Precision Power
PRECISION POWER - Black Ice Series ICE1000.4 1000W 4-Channel Class A/B Amplifier
More DetailsProduct Highlights
arrow_forwardPOWER: Over-compensated high headroom power supply can produce more than conventional power gain with 2-ohm loads.
arrow_forwardENHANCE THE QUALITY: Double-sided PCB's with all Surface Mount Technology (SMT) for an enhanced listening experience.
arrow_forward3-WAY PROTECTION CIRCUITRY: The Black Ice Series ICE1000.4 comes equipped with thermal, overload, and speaker short protection.
arrow_forwardTRI-MODE CAPABLE: Precision Power's ICE1000.4 model is also suitable for tri-mode setups allowing flexibility to host several different speaker configurations; 200mV-6V high or low-level RCA input.
arrow_forwardVERSATILE: Variable 12dB High, Low, and Subsonic crossovers allow you to adjust and calibrate the sound to your liking; direct wire 4 gauge and 8 gauge nickel-plated terminals for maximum signal transfer and minimal distortion.

Precision Power
Precision Power 2500 Watt 4 Channel Amplifier - 2500W 4-Channel Class A/B Subwoofer Amplifier
More DetailsProduct Highlights
arrow_forward2000W MAXIMUM OUTPUT FOR POWERFUL AUDIO.
arrow_forward250 Watts x 4 RMS @ 4 Ohms. / 325 Watts x 4 RMS @ 2 Ohms. / 650 Watts x 2 RMS @ 4 Ohms Bridged.
arrow_forwardCROSSOVERS: Variable High and Low Pass Crossover.
arrow_forward105dB SENSITIVITY: Picks Up The Highs and Lows For Faithful Sound Reproduction.
arrow_forwardInput Sensitivity: 200mV-6V.

.avd.
Precision Power SPL 2 Channel Car Amplifier – Class A/B Multichannel Amplifier 1500 Watt, Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp
More DetailsProduct Highlights
arrow_forwardFeatures – The 2 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V
arrow_forwardClass A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing.
arrow_forwardPower – This Class A/B 1000 Watt Car Amplifier has a power rating distribution as followed 375x2 @2 Ohms, 275x2 @4 Ohms, 750x1 @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
arrow_forwardCrossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover and selectable 6db/12db low pass crossover
arrow_forwardQuality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.

.avd.
Precision Power SPL Monoblock Car Amplifier – Class D Monoblock Amplifier 3000 Watt, Car Electronics Audio Subwoofer 1 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp
More DetailsProduct Highlights
arrow_forwardQUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others.
arrow_forward1 Ohm Stable - This SPL Audio Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
arrow_forwardFeatures – The monoblock bass boost amplifier has features like - Frequency Response: 15~150HZ, Bass Boost, SNR: >105DB, Remote Bass Knob, 2-way protection, Input Sensitivity: 200mV to 6V and THD: <0.05%
arrow_forwardPower – This Class D 3000 Watt Amplifier has a power rating distribution as followed 1500 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 700 X 1 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
arrow_forwardCrossovers- The SPL Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The monoblock car amplifier provides you with options of variable 50-400hz 12db low pass crossover, variable 17-50hz 12db subsonic crossover, variable 0-18db 50hz bass boost, variable 0 degree ~ 180 degree phase shift.

.avd.
Precision Power SPL 2 Channel Car Amplifier – Class A/B Multichannel Amplifier 1000 Watt, Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp
More DetailsProduct Highlights
arrow_forwardClass A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing.
arrow_forwardFeatures – The 2 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V
arrow_forwardPower – This Class A/B 1000 Watt Car Amplifier has a power rating distribution as followed 250x2 @2 Ohms, 125x2 @4 Ohms, 500x1 @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
arrow_forwardQuality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
arrow_forwardCrossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover and selectable 6db/12db low pass crossover

Precision Power
PRECISION POWER - Black Ice Series ICE1300.1D Monoblock Amplifier 1300W
More DetailsProduct Highlights
arrow_forwardPOWER: 1-Ohm Stable Class D Monoblock Operation with a regulated MOSFET PWM power supply
arrow_forwardENHANCE THE QUALITY: Double-sided PCB's with all Surface Mount Technology (SMT) for an enhanced listening experience;
arrow_forward3-WAY PROTECTION CIRCUITRY: The Black Ice Series ICE1300.1D comes equipped with thermal, overload, and speaker short protection.
arrow_forwardBASS BOOST: 12dB bass boost to increase low octave harmonics and give your music some extra punch.
arrow_forwardVERSATILE: Variable 12dB High, Low, Subsonic crossovers with dash-mounted remote gain control allow you to adjust and calibrate the sound to your liking.

.avd.
Precision Power SPL 4 Channel Car Amplifier – Class A/B Multichannel Amplifier 2000 Watt, Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp
More DetailsProduct Highlights
arrow_forwardFeatures – The 4 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V
arrow_forwardClass A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing.
arrow_forwardQuality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
arrow_forwardPower – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 250x4 @2 Ohms, 180x4 @4 Ohms, 500x2 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
arrow_forwardCrossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover and selectable 6db/12db low pass crossover

.avd.
Precision Power SPL 4 Channel Car Amplifier – Class A/B Multichannel Amplifier 1500 Watt, Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp
More DetailsProduct Highlights
arrow_forwardFeatures – The 4 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V
arrow_forwardClass A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing.
arrow_forwardQuality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
arrow_forwardPower – This Class A/B 1000 Watt Car Amplifier has a power rating distribution as followed 185x4 @2 Ohms, 130x4 @4 Ohms, 375x2 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
arrow_forwardCrossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover and selectable 6db/12db low pass crossover

.avd.
Precision Power SPL Monoblock Car Amplifier – Class D Monoblock Amplifier 1500 Watt, Car Electronics Audio Subwoofer 1 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp
More DetailsProduct Highlights
arrow_forwardQUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others.
arrow_forward1 Ohm Stable - This SPL Audio Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
arrow_forwardFeatures – The monoblock bass boost amplifier has features like - Frequency Response: 15~150HZ, Bass Boost, SNR: >105DB, Remote Bass Knob, 2-way protection, Input Sensitivity: 200mV to 6V and THD: <0.05%
arrow_forwardPower – This Class D 1500 Watt Amplifier has a power rating distribution as followed 750 X 1 @ 1 OHM, 500 X 1 @ 2 OHMS, 350 X 1 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
arrow_forwardCrossovers- The SPL Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The monoblock car amplifier provides you with options of variable 50-400hz 12db low pass crossover, variable 17-50hz 12db subsonic crossover, variable 0-18db 50hz bass boost, variable 0 degree ~ 180 degree phase shift.
Related Reads
About Us
© All Rights Reserved. "Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates".