10 Best Kenwood 10 Inch Subwoofers

Product Highlights

arrow_forward300 Watts RMS

arrow_forwardPolypropylene cone

arrow_forwardRubber surround

arrow_forward8AWG push terminals

arrow_forwardBlack stamp steel basket

Product Highlights

arrow_forwardPower Handling: Peak: 1000 watts / RMS: 250 watts

arrow_forwardButyl Rubber Surround

arrow_forwardCarbon-glass fiber composite cone

arrow_forwardFrequency Response: 35 Hz - 800 Hz

Product Highlights

arrow_forwardTOP RATED CAR SUBWOOFER: Our Massive Subwoofers produce great sound and are built for any vehicle...competition or daily driver! Our CEA 2031 Certified Subwoofer is rated at 400 watts RMS / 800 watts MAX power with a 2" voice coil configured for dual 4 ohm impedance. Our Massive Subwoofer is used by countless high end Car Audio enthusiasts for big sound and high scores that toss the competition out of the ring!

arrow_forward8 INCH SUBWOOFER WITH GREAT SOUND QUALITY | With an amazing deep base, it is the best sounding Bass Subwoofer in the market! The sound that comes out of this 8 inch Subwoofer Speaker will greatly improve the sound quality of your car audio system! It’s bonded to a heavy gauge steel basket that’s bolted to double stacked high flux Y30 120oz Strontium ferrite magnets with a 10mm top plate, producing great sound that lasts longer than your factory subwoofers and other more expensive brands!

arrow_forwardTURN UP THE VOLUME! OUR CAR SUBWOOFER IS GUARANTEED TO LAST! | Don't take the risk of buying Car Subwoofer Speakers that Snaps, Crackles, and Pops after short use due to Cones and Rubber that are as soft as butter. Our Fully Loaded Subwoofer is guaranteed not to rattle in any high volume! Great Sound dances on a springy poly cotton spider with high powered woven tinsel leads that connect to spring loaded 5-way binding nickel plated speaker connectors!

arrow_forwardTHE ONLY CAR AUDIO SUBWOOFER YOU WILL EVER NEED | Are you frustrated with those poor quality car subwoofers from other brands that blow out over time? With our high quality construction, great sound and long lasting performance, our Car Subwoofer is all you will ever need! Its perfect as Ford f150 Subwoofers, f150 Supercrew Subwoofer, f250 Subwoofer, Dodge Ram 1500 subwoofer, Toyota Tacoma Subwoofer, GMC Sierra Subwoofer, Dodge Ram Subwoofer, Crew Cab Subwoofer, and others!

arrow_forwardMASSIVE AUDIO QUALITY GUARANTEED | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers. Buy today, risk-free! ***Smallest Sealed Enclosure = 9" L x 9" W x 10" H

Product Highlights

arrow_forwardCompC 10 inch 4 ohm dual voice coil subwoofer

arrow_forwardFeatures 500 watts of max power and 250 watts of RMS power handling

arrow_forwardUses perimeter venting for managing heat

arrow_forwardInjection molded polypropylene cone

arrow_forwardRibbed polyurethane surround

Product Highlights

arrow_forwardFeatures 2 Inch Copper Clad Aluminum Voice Coil

arrow_forwardStamp Cast Frame Structure

arrow_forwardIntegrated PVC Trim Ring

arrow_forwardMica Injected Polypropylene Cone

arrow_forward250 Watts RMS 500 Watts Peak Power Rating

Product Highlights

arrow_forwardGothic woofer cones use torsion twisted Flax fibers woven together for ultimate strength and less elasticity. A heavy soaking in epoxy combined with the sonic qualities of pulp paper, Flax proves itself worthy of any system

arrow_forwardGothic woofers utilize an extended excursion NBR (nitrile butadiene rubber) surround for it’s strength and flexible prosperities during extreme movement

arrow_forwardVenting built into the T-Yoke, back plate, and voice coil extract and dissipate heat, ensuring Gothic woofers keep their cool and avoid catastrophic woofer failure

arrow_forwardSurrounds of Gothic woofers are double overcast stitched directly to the Flax cone surface. In addition to superior adhesives, overcast stitching improves the conventional bond between cone and surround

Product Highlights

arrow_forwardThe Voice Coil Cooling System (VCCS) improves durability and faithfully reproduces the sound of original sources.

arrow_forwardThe specially designed voice coil offers higher power handling, linear movement and greater excursion for extreme bass output.

arrow_forwardThe IMPP (Injection Molded Polypropylene) cone provides increased strength and rigidity for optimized bass response.

Product Highlights

arrow_forwardThe P3 Series is Rockford Fosgate’s best performing Punch subwoofer delivering reference quality bass in our most popular models

arrow_forwardThe Punch P3D4-10 is a 10” 4-Ohm DVC (dual voice coil) subwoofer with 500 Watts RMS / 1000 Watts Max power handling and custom 10-AWG nickel plated push terminals

arrow_forwardFeaturing anodized aluminum cones and dustcaps, with a unique spider venting design to keep the motor cooler and a new hybrid stamp-cast basket providing super strength while minimizing weight and resonance

arrow_forwardBest used in standard sealed or vented enclosures {Sealed (Vb): 0.59 cu. ft. (16.7 Liters) / Vented (Vb): 1.4 cu. ft. (39.6 Liters) / Mounting Depth: 6.18 in. (156.8 mm) / Cutout Diameter: 9.13 in. (232 mm)

arrow_forwardFamous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

Product Highlights

arrow_forward10-Inch Dual 2-ohm Car Subwoofer

arrow_forwardPeak Power: 1,200 Watts | RMS Power: 600 Watts

arrow_forward2.5" 4-Layer High Temperature Copper Voice Coil

arrow_forwardFrequency Response Range: 28 Hz - 300 Hz | Sensitivity: 82.0 dB

arrow_forwardHigh Flux Ferrite Motor | Advanced Air Flow Cooling Design

Product Highlights

arrow_forwardCompact Series Monoblock Class D Car / Marine Amplifier

arrow_forwardRMS Power Rating: 4 ohms: 200 watts x 1 chan. / 2 ohms: 300 watts x 1 channel

arrow_forwardMax power output: 600 watts x 1 channel

arrow_forwardPulse Width Modulated MOSFET power supply

arrow_forwardLED power (green) and protect (red) indicators: Soft start turn-on