10 Best Hvac Clamp Meter

Product Highlights

arrow_forwardBuilt in thermometer for HVAC applications

arrow_forwardMicroamps to test flame sensors

arrow_forwardLoZ: helps prevent false readings due to ghost voltage

arrow_forwardLarge white LED backlight to work in poorly lit areas

arrow_forwardResistance, continuity, frequency and capacitance

Product Highlights

arrow_forwardFluke 116 digital multimeter features built-in thermometer for HVAC applications

arrow_forwardFluke 116 digital multimeter features micro amps to test flame sensors

arrow_forwardFluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage

arrow_forwardFluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage

arrow_forwardFluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on nonlinear signals

Product Highlights

arrow_forward200 µa dc current measurements to measure flame rod

arrow_forwardExtended resistance range to measure thermistors up to 60k Ω

arrow_forwardCapture flue gas temperature

arrow_forwardFluke connects your meter to your phone through Bluetooth to help you get more done faster and safer

arrow_forwardTrue-rms voltage and current for accurate measurements on non-linear signals

Product Highlights

arrow_forwardTrue-RMS

arrow_forwardCapacitance measurement for start and run motor capacitors

arrow_forwardSafety Rated: CAT III 600 V (AMP-310, AMP-320); CAT IV 600 V, CAT III 1000 V (AMP-330)

Product Highlights

arrow_forwardDigital clamp meter measures alternating current (AC) to 1,000 amp, direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms

arrow_forwardAverage-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform

arrow_forwardTransformer clamp with 1.77" (45 mm) jaw opening measures current without touching or interrupting the circuit

arrow_forwardA relative zero mode stores a reading in memory to use as a zero point for subsequent readings

arrow_forwardMeets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V

Product Highlights

arrow_forwardElectrical Tester measures AC/DC voltage up to 1000V, 600A AC Current, 60M Resistance, DC millivolts and microamps

arrow_forwardAmp Clamp with automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating

arrow_forwardClamp measures AC current and inrush current

arrow_forwardTwo K-Type thermocouple ports for differential temperature measurements

arrow_forwardTest leads measure AC/DC voltage, DC micro amp, resistance, LoZ, continuity, frequency, duty-cycle, capacitance, and diodes

Product Highlights

arrow_forwardTrue RMS

arrow_forward600A AC; Clamp Meter

arrow_forward750V AC/600V DC; Resistance 60MΩ

Product Highlights

arrow_forwardClamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy

arrow_forwardMeasures AC current via the clamp and AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance and test diodes via the test leads

arrow_forwardThermocouple probe measures temperature

arrow_forwardBuilt to withstand a 3.3-foot (1 m) drop

arrow_forwardCAT III 600V, Class 2, Double insulation safety rating

Product Highlights

arrow_forwardVolts AC/DC

arrow_forwardTrue RMS measurements

arrow_forwardInrush current

arrow_forwardFrequency via leads and clamp

arrow_forwardTemperature F/C

Product Highlights

arrow_forwardDigital clamp meter measures alternating current (AC) and direct current (DC) to 1,000 amp, DC voltage to 1,000 volts (V), AC voltage to 750V, capacitance to 6.6 millifarads, resistance to 66 megaohms, frequency to 1 megahertz (MHz), and duty cycles

arrow_forwardTrue RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform

arrow_forwardClamp with a 2" (57 mm) jaw opening measures current without touching or interrupting the circuit

arrow_forwardRelative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings

arrow_forwardMeets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V and category IV installations up to 600V