10 Best Hobby Milling Machines

Product Highlights

arrow_forwardName: GRBL 1.1F 3 Axis Control Board V3.4+Offline Controller

arrow_forwardInput voltage: 12-24VDC (recommend 24VDC);

arrow_forwardSupport GRBL Contol/Candle(3 axis);Laser Grbl;Support System:Windows XP/7/8/10;Support Laser:12V 5Amax;

arrow_forwardSupport stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57);Support spindle:24V 2A Support Spindle PWM speed (0%-100%)

arrow_forwardMaster chip: atmel 328P (arduino nano);Offline Control support SD card and tf card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient)

Product Highlights

arrow_forwardQuiet, precise and vibration-free for fatigue free use

arrow_forwardLow weight and slim design, without ever compromising performance

arrow_forwardHigh quality precision tools

Product Highlights

arrow_forwardOverall height: 23"

arrow_forwardSpindle travel: 1-5/8"

arrow_forwardDrill chuck: 1/64" - 1/2"

arrow_forwardDust port size: 2"

arrow_forwardSwing: 8-1/2"

Product Highlights

arrow_forwardVariable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting

arrow_forward18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis

arrow_forwardBevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more

arrow_forwardCompact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print

arrow_forwardIncludes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty

Product Highlights

arrow_forwardPremium quality milling vise features perfectly aligned precision gowned jaws

arrow_forwardAcme screws

arrow_forwardTrust your best work with these quality milling vises

arrow_forwardMade from the highest quality ductile Iron 80000 PSI for minimum bending

arrow_forwardDesigned so horizontal force pushed the jaws downward, keeping your piece in the right spot

Product Highlights

arrow_forwardTable size: 350 × 100mm. Hand wheel with adjustable scale:A ring=1.5mm.

arrow_forwardZero adjustment handwheel rotates a circle of 1.25mm. A lattice is equal to 0.05mm.

arrow_forwardAdjustment in X direction: 180mm. Adjustment in Y direction: 50 mm. Distance between grooves : 34mm

arrow_forwardThe table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.

arrow_forwardThe work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.

Product Highlights

arrow_forward★Mini multifunctional working table 6330.The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.

arrow_forward★The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.

arrow_forward★Table size: 330 × 95mm

arrow_forward★Adjustment in X direction: 190mm. Adjustment in Y direction: 65 mm. Distance between grooves : 34mm

arrow_forward★Hand wheel with adjustable scale:A ring=1.5mm

Product Highlights

arrow_forwardHinged belt cover allows faster speed changing

arrow_forward9 1/2 by 31 3/4 inch worktable

arrow_forward2 hp, 1 phase, 230 volt only motor

arrow_forwardHeavy duty tapered roller bearings’ support the spindle

arrow_forwardStand not included

Product Highlights

arrow_forwardCombo of 4" /100 mmTilting Rotary Table & 65 mm 3 Jaw Self Centering Chuck with Back Plate & T nuts

arrow_forwardFeatures to tilts between 0- 90 Degrees & can be locked at any position.

arrow_forwardTable is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.

Product Highlights

arrow_forwardThe table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.

arrow_forwardThe work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimum space and ensure the accuracy.

arrow_forwardThe working table comes with 3 # Hexagonal wrench * 1, exquisite equipment * 1, M8 * 30

arrow_forwardZero adjustment handwheel rotates a circle of 1.50 mm. A lattice is equal to 0.05mm.

arrow_forwardAdjustable for X direction:190mm, Adjustment for Y direction:67mm