10 Best Festool Drills

Product Highlights

arrow_forwardDrive Shank: Festool Centrotec Compatible Shank

arrow_forwardRecommended Drill Size: 3/16 inch

arrow_forwardAccepted Range of Drills (Decimal Inch): .174" .189"

Product Highlights

No Items to Display

Product Highlights

arrow_forwardPrecisely and efficiently build cabinets using the European frameless 32 mm system

arrow_forwardFor placing cup hinges (35mm) or setting shelf pin holes in casework

arrow_forwardPortable line boring system allows you do in the field what has traditionally been a shop-only job

arrow_forwardFor use with Festool OF 1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately)

arrow_forwardIncludes: Guide plate, Centering mandrel, 2 edge stops, 2 linear stops, 2 clamps, wrench, 35mm European hinge boring bit, 2 5mm shelf pin bits

Product Highlights

arrow_forwardAllows you to drive screws or drill holes in extremely tight or hard to reach spaces without the need for dedicated tools

arrow_forwardAccepts Festool Centrotec or adjustable 1/2 inch chuck. Chuck rotates 360 degrees with 16 presets.

arrow_forwardSwitch between drill functions in seconds with the FastFix interface, saving time and eliminating cost of dedicated, single purpose tools

arrow_forwardGetting it right the first time eliminates waste of material and fasteners and saves valuable time

arrow_forwardFits all existing and previous model Festool drills equipped with FastFix interface: T+3, C12, TDK, TDD, and CDD

Product Highlights

arrow_forwardSet of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments

arrow_forwardCobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials

arrow_forwardGold oxide finish lubricates the drill bit and provides wear resistance

arrow_forwardSelf-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging

arrow_forwardMeets ANSI specifications

Product Highlights

arrow_forwardNOTE: The DF 500 only come with the 5MM cutter which is installed.

arrow_forwardUnique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.

arrow_forwardMortise width adjustment with the turn of a dial allows for easier alignment when joining panels.

arrow_forwardPivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.

arrow_forwardIndexing pins for quick alignment against the edge of the workpiece for accurate placement. Hose port diameter: 1.06 inch

Product Highlights

arrow_forwardCarbide tipped bit - withstands 5,000 to 14,000 joints, depending on material

arrow_forwardSpiral flutes for clean cuts

arrow_forwardInternally threaded for quick, easy bit changes

arrow_forwardCreates perfect mortise width for Festool 10 mm tenons

arrow_forwardIncludes 1 Domino Cutter

Product Highlights

arrow_forwardHybrid power source - corded or cordless operation

arrow_forwardErgo battery for balance and ergonomics

arrow_forwardHighly effective dust extraction for cleaner surfaces and work environment

arrow_forward30 minute recharge for 18-volt, 3.1 Ah battery (with TCL 6 charger)

arrow_forwardProtector guard protects pad and adjacent surfaces from damage

Product Highlights

arrow_forwardThe new domino basic structure connectors and furniture connectors can be positioned simply and universally – in combination with domino or a series of holes.

arrow_forwardRouting and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture.

arrow_forwardAll joints are simple and quick to machine using the domino DF 500 joiner. No additional special machine is required.

arrow_forwardThe connectors' large tightening distance and long bolts make furniture assembly significantly easier. Cupboard assembly is therefore no problem, and you can do it easily on your own.

arrow_forwardThe clever domino system enables very simple and precise positioning of joints, thereby rendering additional stops and positioning aids unnecessary. For working efficiently and quickly.

Product Highlights

arrow_forwardCarbide tipped bit-withstands 5,000 to 14,000 joints, depending on material

arrow_forwardSpiral flutes for clean cuts

arrow_forwardInternally threaded for quick, easy bit changes

arrow_forwardCreates perfect mortise width for Festool 10mm tenons

arrow_forwardIncludes one Domino Cutter