arrow_forwardGain / attenuation value can be chosen as + /-6dB or + /-l5dB. Input gain control is a block of step 41 rotary potentiometers. With EQ selection key. you can EQ bypass. 40Hz low-frequency cut filter on the live performances of non- Often used. Ill with the latest type of noise reduction circuit, the improvement of SNR 20 db. 8uilt-in limiter, threshold adjustment range from 0 to +24 dB. 4 only LEO display output level: 10, 0, +10 and +18 dB. Electronic balanced / unbalanced input. Output Bitmap for the servo balanced / unbalanced. Generality speaking. the signal flow equalizer is the weakest link.
arrow_forwardTechnical parameters: Bandwidth: 20Hz-20kHz. +0. 5d8/-1Db Dynamic range: 109dB 115dB / SNR: 90dB 97dB / Total harmonic distortion + noise: <0. 005% / Crosstalk between channels: <-80dB, 20Hz-20kHz /
arrow_forwardEnter Interface: 1 / 4 inch TRS. XLR sockets (two feet for the hot working side, female), and terminal strips / Type: Electric balanced / unbalanced, RF filtered / Impedance: balance is 40kQ. non-equilibrium for the 20 koi Maximum Input level: > +21 dB, balanced or unbalanced / CMRR: > 40dB, typically> 55dB, 1kHz
arrow_forwardExport interface: 1/4 inch TRS. XL sockets (two feet for the hot working side, Female), and terminal strips/ type: Impedance balanced/ unbalanced, RF filtered/ Impedance: balance is 200 Ω, 100 Ω unbalanced maximum Input level: > +21 dB. Balanced/ unbalanced loads or more loads 2K Ω car: 18dBu, balanced/ unbalanced (connected 600 Ω load)