arrow_forward🚗 【 Video output 】 Two videos output, one for car monitor, the other for car DVR.Front view camera power: supplied by control box system.
arrow_forward🚗 【 Post-test 】 When the ACC power is turned on, the system will enter the self-test without the reverse trigger, so that the rear and front cameras are illuminated for two seconds in sequence, and finally enter the front view display. After 6 seconds, no other trigger will automatically turn off all the lights. camera. In the process of self-test, if there is a reverse trigger, the self-test will be automatically terminated and the corresponding trigger function will be displayed.
arrow_forward🚗 【 Rear view camera power 】supplied by control box system, or could be supplied by reverse lamp power.Left / Right side view camera power: supplied by control box system.
arrow_forward🚗 【 Front and rear mode 】A. When the reverse gear is engaged, the display is displayed behind, leaving (without delay) the display for the first 6 seconds, and automatically closing after 6 seconds. B. Press the button once, open the front view normally open mode, and then press the button to close the front view. Trigger priority order Press the button function to open the front view normally open mode, and then press the button to close the front view.
arrow_forward🚗 【 Switch function 】 Press for less than 1 second: Side View mode. Front View mode Press for 2seconds (in Front mode): Front View always working / Front View turn off.Cameras are not included. 1 year warranty.Please note it only display one interface,not four interface at the same time. It doesn't includes camera.If you want to make this function,you should have installed 3 360degree camera and 1 rearview camera.