10 Best Car Audio Horns

Product Highlights

arrow_forwardCRISP HIGH FREQUENCY OUTPUT: Built to produce loud and clean audio. The included bass blocking capacitors protect the tweeters from harmful low frequency signals.

arrow_forwardSPECS TO IMPRESS: 200W RMS Power (Pair), 400W Peak Power (Pair), 8 Ohm impedance, 99dB sensitivity, 3 KHz - 20 KHz frequency response, 1" High-Temperature Voice Coil, High Flux Ferrite Magnet System

arrow_forwardQUALITY GUARANTEED: Audio Legion prides itself on high quality, reliable products. Whether it's factory replacement coaxial speakers or competition-level subwoofers and amplifiers, you will not be disappointed.

arrow_forwardEASY TO REPLACE DIAPHRAGMS: No need to purchase new units, a screwdriver is the only tool you need to get back up and running.

arrow_forwardPERFECT ADDITION TO ANY PRO AUDIO SYSTEM: Audio Legion’s super tweeters will give your audio setup a massive high frequency boost. A great gift to any audio enthusiast!

Product Highlights

arrow_forward200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style

arrow_forward1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction

arrow_forward8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound

arrow_forward25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size

arrow_forward20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D

Product Highlights

arrow_forward1" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, mylar capacitor crossover, and an aluminum horn included make these the best drivers available.

arrow_forwardRELIABLE POWER - At 120W Max and 60W RMS the PRO-DKN25 compression (horn) driver boasts out-of-this-world power handling for a Pro audio speaker at a value price point.

arrow_forwardTOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best.

arrow_forwardHORN INCLUDED - DS18 has gone to great lengths to make sure this is compression driver has everything you would need by including an aluminum horn with these PRO line drivers

arrow_forwardDURABLE & LONG LASTING PERFORMANCE - this compression driver doesn’t draw an excessive amount of power from your amplifier & ensures long-lasting performance from your equipment.

Product Highlights

arrow_forwardLOUD AND CLEAR SOUND: This compact mono trumpet speaker is a perfect tool if you want to make your voice audio or music louder. It features 8 ohm impedance and 112bd output, making it ideal for outdoor and indoor spaces

arrow_forwardGREAT FREQUENCY RESPONSE: Efficient enough to achieve your desired response, this 5” power horn speaker can amplify up to 450~5,000hz. Easily mount on the roof or under the car hood

arrow_forward15 WATT PEAK POWER: This heavy duty high powered cb radio pa speaker features 8 watts rms nominal power and 15 watts peak maximum power so you can amplify your sound with clarity and achieve your desired loudness

arrow_forwardADJUSTABLE BRACKET: The horn speaker can be bent and adjusted. For easy maneuverability, the 5-inch ABS horn is equipped with a 180 degree swiveling adjustable mounting brackets

arrow_forwardWIRING INCLUDED: A 10-inch pre-wired cord with 3.5mm mono connector is included to make installation easier. The power horn only weighs 0.93 lbs. and comes with a one-year warranty.

Product Highlights

arrow_forward600 WATT POWER: This high powered audio projection midrange/tweeter system has a maximum power output of 600-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style

arrow_forward1.5kHz-18kHz FREQUENCY RESPONSE: The car tweeter compression driver has a frequency response of 1.5kHz ~ 18kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction. Fits horns w/ 1 3/8" x 18 TPI threads

arrow_forward8 OHM IMPEDANCE: This car tweeter has 2" flat aluminum voice coil, 102dB @ 1W/ 1M, & 8ohm impedance rating that compensates the undersized wire found in most cars. Reduces distortion so you can enjoy crisp & clear sound

arrow_forward2” TITANIUM DIAPHRAGM: PylePro follows the standard size for most car stereo systems & created this midrange/tweeter compression horn driver with 2-inch titanium diaphragm. This high power tweeter compression horn will get you higher than high

arrow_forward60 OZ MAGNET STRUCTURE: These tweeters have a 60 oz magnet structure. The heavy-duty housing provides a strong foundation & is easy to install to your car's sound system. Provides crispest, most accurate highs possible w/ modern speaker technology

Product Highlights

arrow_forward3.5-inch High Compression Titanium Bullet Super Tweeters

arrow_forwardMax Power: 500 Watts

arrow_forwardRMS Power: 300 Watts

arrow_forwardThe Max power rating, for each tweeter is 250 Watts, for a total of 500 Watts.

arrow_forward1" High Temperature Kapton Voice Coil with In-line Capacitor Crossover

Product Highlights

arrow_forwarddriver horn Orion

Product Highlights

arrow_forward2 Inch Cloth Diaphragm - 30 oz. Magnet

arrow_forward2 Inch High-Temperature Voice Coil - 8 Ohm Impedance

arrow_forward500 Watts Max.

arrow_forwardFrequency Response: 400 Hz - 9000 Hz

arrow_forwardSPL: 102dB (1W/1M)

Product Highlights

arrow_forwardSize 1". RMS/Peak Power 50/100 watts. RMS Power Handling: 50 Watts

arrow_forwardPEAK Power Handling: 100 Watts Frequency Response: 3 kHz – 20 kHz SPL @ 1w/1m: 109 dB System Impedance: 3-Ohm

arrow_forwardMagnet Weight: Neo Structure Weight: Neo Cutout Diameter: 1.63″ Mounting Depth: 1.60″

Product Highlights

No Items to Display