10 Best Bench Vise Jaws

Product Highlights

arrow_forwardNon-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials

arrow_forwardEasy Install – The soft jaws attach to your vise with 3 neodymium magnets; no screws or bolts needed

arrow_forwardGrooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for gunsmithing, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings

arrow_forwardUniversal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise

arrow_forwardSizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details

Product Highlights

arrow_forwardUse to replace worn parts on a Mechanics vise.

arrow_forwardJaws are made from hardened steel.

arrow_forwardJaw plates are fully machined on all load-bearing surfaces.

arrow_forward6-inch plates fit #6 Mechanics vises.

Product Highlights

arrow_forward(1) Pack: (2) piece jaw cover set fitting a 4-6” (76-152mm) vise

arrow_forwardPerformance: 6" thermoplastic polyurethane (TPU) pair of vise jaw covers can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items safely protecting any product flat or round.

arrow_forwardDesign: Special designed diamond pattern surface holds and protects parts while clamping. Designed to fit any 4-6 in. (76-152mm) vise jaw.

arrow_forwardAdvantage: (3) Three strong embedded magnets keep jaw covers in place securely versus (2) magnets.

arrow_forwardMulti-purpose: The magnetic jaw covers are great with variety of vise: bench vises, drill press vises and so forth

Product Highlights

arrow_forwardMULTIPURPOSE DESIGN - These 4" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Perfect for holding any round, flat or irregular metal, plastic or wood objects.

arrow_forwardCOMPATIBILITY - Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.

arrow_forwardPROTECT DELICATE SURFACES - Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gunsmithing, jewelry making, and more.

arrow_forwardGROOVED SURFACE - Our soft vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place.

arrow_forward8 STRONG MAGNETS FOR EASY ATTACHMENT - Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.

Product Highlights

arrow_forwardPack: (2) piece jaw cover set fitting a 4-6” (76-152mm) vise

arrow_forwardPerformance: Non Marring 6" thermoplastic polyurethane (TPU) pair of vise jaw covers can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items safely protecting any product flat or round.

arrow_forwardEasy to Install: (1) pair of soft jaws attach to your vise using 3 magnets; no screws or bolts needed

arrow_forwardGrooved Design: Multi-purpose design pattern ideal for wood, metal, plastic parts. Use in gunsmithing, woodworking, jewelry making, crafts, threaded items, pipe, tubing, and fitting operations

arrow_forwardAdvantage: (3) Three strong embedded magnets keep jaw covers in place securely versus (2) magnets.

Product Highlights

arrow_forwardUse to replace worn parts on a Mechanics vise.

arrow_forwardJaws are made from hardened steel.

arrow_forwardJaw plates are fully machined on all load-bearing surfaces.

arrow_forward5-inch plates fit #5 Mechanics vises.

Product Highlights

arrow_forwardNylon soft visa jaws protect the vise from damage.

arrow_forward5.5" Universal Soft Jaws are compatible with corresponding mill vise, bench vise and etc.

arrow_forwardThe vise pads, with strong magnetic, easy to securely fasten to the vise.

arrow_forwardThe vise block can be used to hold firearms, jewelry, threaded items, tubing, AN fittings and wood.

arrow_forwardCan be horizontal, vertical, 60 degrees clamping, strong clamping, not easy to deform.

Product Highlights

arrow_forwardUNIVERSAL COMPATIBILITY - Compatible with almost any bench vise, machine vise, drill press vise, material clamps, etc.

arrow_forwardHIGH TEMPERATURE RATING – BLUEJAWZ welcome Extreme heat or cold.

arrow_forwardEASY INSTALL - The soft jaws attach to your vise with 3 neodymium magnets. No screwing or bolting required.

arrow_forwardNON-MARRING & PART FORMING - BLUEJAWZ vise jaws are made from a tough, proprietary blend of high temperature silicone. The vise jaws will conform to the clamped part conforming to the part shape maximizing the surface area grab on the product.

arrow_forwardTEXTURED or GROOVED DESIGN - The BLUEJAWZ multi-purpose vise soft jaws are ideal for gunsmithing, automotive, woodworking, metal working, plumbing, soldering, jewelry making, arts & crafts, etc.

Product Highlights

arrow_forward4.5” Universal Vise Jaws are designed to fit in standard bench vises (3-6”), but can also be used with mills, drill press, and other places you need a secure hold.

arrow_forward4x magnets add stability , Thermoplastic polyurethane material

arrow_forwardStrong embedded magnets keep inserts securely in place

arrow_forwardGreat for holding wood, metal, plastic, and tubing. Ideal for all kinds of shop, craft, jewelry, and gunsmithing projects.

arrow_forwardMulti-groove design provides a number highly useful holding slots to keep items in place. 90 degree angles for widths of approximately 1/16", 1/8", 1/4" and 3/4". 60 degree angle for width of approximately 13/32"