10 Best Bench Buffers

Product Highlights

arrow_forward★【Improved Version】: latest the third generation TM-2 mini table saw machine with larger operating platform and better accessories than market. Work better for polishing ,cutting, grinding, carving, of jewelry, rock, aluminum,chrome, precious metal, jade, wood, plastic, model project.

arrow_forward★【Easy-operated workbench】: mini bench buffer grinder has a detachable, flexible 42.5 inch shaft and angle adjustable ruler, suitable for various size cutting. It’s very flexible and practical for DIY enthusiasts due to the precision maneuverability.

arrow_forward★【High efficiency】: 0-10000 RPM possible, you can easily control variable speed with the front dial as needed. comes with two 4-1/4 inches buffing wheels(can be used with wheels up to 6 inches in diameter) and 2 blades can cut 30mm objects. And threaded mandrels help you easily replace the buffing wheels as needed.

arrow_forward★【Safely use】: this polishing machine using a 110 Volt, 350 power motor, no loss of speed or quality. You can use 2 different types of grit at the same time. Buffer smooth and quiet with a blade guard to block dust and protect the eyes.

arrow_forward★【Size information】: the whole rock polisher machine measures 10.4”X 8.7”X 5.3” ( 26 cmX22 cm X 14 cm), and it weighs 15.4 pounds.

Product Highlights

arrow_forwardINCLUDES: 6" Bench Buffer Machine

arrow_forwardFUNCTION: An easy-to-use buffing station designed for a variety of buffing and polishing projects

arrow_forwardFEATURES: Dual end wheels for simultaneous polishing, a convenient off/on switch and extra long ball bearing supported machine shafts

arrow_forwardHEAVY DUTY BUILD: This benchtop buffer polisher was made with a cast iron base providing a weighted and stabilized platform for reduced vibration, while also eliminating potential damage often caused by vibrational buffering

arrow_forwardPOWER BUFFER SPECS: 6" buffing wheel diameter, ½ horsepower induction motor, 120V, 60 Hz 3450 RPM

Product Highlights

arrow_forwardIncludes full manufacturer warranty

Product Highlights

arrow_forwardRAPID STOPPING: Brake resistor will reduce RPM speed from 3,600 to 0 in less than 20 seconds.

arrow_forwardHEAVY-DUTY: 1-HP motor is housed in a full casted body.

arrow_forwardVARIABLE SPEEDS: 900 to 3,600 RPM.

arrow_forwardLONG MACHINE LIFE: Totally-enclosed pre-lubricated ball bearings.

arrow_forwardCSA/CUS CERTIFIED: This buffer follows strict guidelines and electrical requirements.

Product Highlights

arrow_forwardImproved version: latest 3rd generation lapidary equipment with larger operating platform and better accessories than market. Work better for polishing ,cutting, grinding, carving, of jewelry, rock, aluminum,chrome, precious metal, jade, wood, plastic, model project.

arrow_forwardEasy-operated workbench: mini rock saw for cutting rocks has a detachable, flexible 42.5 inch shaft and angle adjustable ruler, suitable for various size cutting. It's very flexible and practical for DIY enthusiasts due to the precision maneuverability.

arrow_forwardHigh efficiency: 0-10000 RPM possible, you can easily control variable speed with the front dial as needed. comes with two 4-1/4 inches buffing wheels(can be used with wheels up to 6 inches in diameter) and 2 blades can cut 30mm objects. And threaded mandrels help you easily replace the buffing wheels as needed.

arrow_forwardSafely use: this polishing machine using a 110Volt, 200W power motor, no loss of speed or quality. You can use 2 different types of grit at the same time. Buffer smooth and quiet with a blade guard to block dust and protect the eyes.

arrow_forwardSize information: the whole mini metal lathe measures 10.4"X 8.7"X 5.3" ( 26 cmX22 cm X 14 cm), and it weighs 15.4 pounds.

Product Highlights

arrow_forwardArbor diameter: 3/4-Inch

arrow_forwardArbor length (each side): 8-1/4-Inch

arrow_forwardMaximum buffing wheel: 10-Inch

arrow_forwardRecommended motor speed: 1,725 rpm

arrow_forwardMinimum recommended horsepower: 1/3 horsepower, drive belt size: 4l280, approx. Shipping weight: 30-pound

Product Highlights

arrow_forwardThis Bench Polisher has pre-lubricated ball bearings and a dust-proof motor housing that makes it virtually maintenance free.

arrow_forwardQuality or speed with this well balanced precision polisher, works with standard wheels and buff pads up to 4 inches.　

arrow_forwardThe Jewelry Buffer is designed to burnish and polish jewelry metals, stone, glass

arrow_forwardThe two tapered spindles attach to the 1/4" motor shafts and accomodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter

arrow_forwardVariable speed to 10,000 rpm.

Product Highlights

arrow_forwardThis Bench Polisher has pre-lubricated ball bearings and a dust-proof motor housing that makes it virtually maintenance free.

arrow_forwardPolisher works with standard wheels and buff pads up to 4 inches.

arrow_forwardVariable speed to 10,000 rpm

arrow_forwardThe Jewelry Buffer is designed to burnish and polish jewelry metals, stone, glass .

arrow_forwardThe two tapered spindles attach to the 1/4" motor shafts and accomodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter.

Product Highlights

arrow_forwardThe two tapered spindles attach to the 1/4" motor shafts and accomodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter.

arrow_forwardQuality or speed with this well-balanced precision polisher works with standard wheels and buff pads up to 4 inches.

arrow_forwardThe polishing machine is a 350W high-power machine,220V,and the speed can reach 10000r/min,which can improve work efficiency and save your time.

arrow_forwardThe Jewelry Buffer is designed to burnish and polish jewelry metals, stone, glass,jade,agate,metal,wood ,beads

arrow_forwardthe Bench Polisher has pre-lubricated ball bearings and a dust-proof motor housing that makes it virtually maintenance-free.